產品描述
Introduction:
corrugated paperboard production line is compose of shaft less mill roll stand ,fingerless type single facer (vacuum suction type), pre-heater, over bridge, gluer machine, double facer, cut off machine, slitter scorer machine, stacker and glue making system.
The feature of our machine:high automatization, easy operation & maintain, high efficiency,good quality of paperboard,compact structure Corrugated Cardboard Production Line is the professional equipment for producing corrugated cardboard.
1600-2200 Three/Five/Seven Layer Line Tech Reference:
| NO. | Name | QTY |
| 1 | Reel Stand( with feeding track & trolley) | * sets |
| 2 | Vacuum absorbable feeding Single facer | * sets |
| 3 | Pre-heater | * sets |
| 4 | Gluer Machine | 1 set |
| 5 | Multi-layers Pre-heater | 1 set |
| 6 | Conveying Bridge | 1 set |
| 7 | Double Facer | 1 set |
| 8 | Electric Slitter Scorer | 1 set |
| 9 | Cut Off | 1 set |
| 10 | Carton Sheet Stacker | 1 set |
| 11 | Glue Making Station System | 3 sets |
MODEL: 1800-7 LAYER CORRUGATOR LINE
1. Manufacture width: 1800mm.
2. Note: The roll paper which is used to test the production speed should meet following requirements:
*Grade: Min. B
* Moisture content: 11% ± 2%
*Face paper: 100~250g/m2
* Liner paper: 100~150g/m2
* Corrugated paper: 100- 200g/m2
3. Flute profiles: A, B, C, E flute (as per client's request)
4. Electricity: 380V, 50Hz,three-phase four wire type（also can do as per clients country electricity standard）
5. Equipment Direction: Left or Right transmission will be according to client's requirements.
6. Factory request size: specific length as to the foundation of drawing.
